The SD card-equipped DMX512 ARTNET controller is the solution for your 8-universe projects where you don't want to use a computer. This device has 8 ports and can run a total of 8 universes. It also has a Wi-Fi module, allowing you to connect to the device via Wi-Fi from your computer. The SD card allows you to add LED animation patches. The SD card-equipped DMX512 controller reads and processes the animations you create from this card.
Technical Specifications
- It has a capacity of 8 Universes.
- Each port controls 1 Universe.
- This means you can control 512 channels with each port.
- The device operates on 24V DC power.
- The product has an integrated Wi-Fi module.
- It has one SD card slot.
Calculations for a DMX RGB Product Example:
- If you provide control of 512/3=170 pixels per port for the RGB product.
- If you are using 6 pixels per meter DMX RGB linear LED products, that means 170/6 = 28 meters for each port.
- In summary, this device allows you to control approximately 224 meters of DMX RGB linear LEDs.
Calculation for DMX RGBW Product Example:
- If you provide control of 512/4=128 pixels per port for the RGB product.
- If you are using 6 pixels per meter DMX RGB linear LED products, that means 128/6 = 21 meters per port.
- In short, with a device that has an SD card, you can control approximately 168 meters of DMX RGBW linear LEDs.
You can use the ARTNET product with Wi-Fi module in your indoor DMX facade lighting and LED animation projects. This allows you to create animations in projects with no more than 8 universes without using a computer or software.
