The DMX512 ARTNET controller is ideal for large-scale projects. One device works with 8 Universes. You can add more devices as the number or length of DMX LEDs increases. These devices are connected to a switch via an Ethernet Cat6 network. Then, you can control these devices via DMX control software from your PC. Alternatively, you can also control them with a master controller with an SD card.

Technical Specifications

• It has a capacity of 8 Universes.
• Each port controls 1 Universe.
• This means you can control 512 channels with each port.
• The device operates on 24V DC power.

Calculations for a DMX RGB Product Example:

• If you provide control of 512/3=170 pixels per port for the RGB product.
• If you are using 6 pixels per meter DMX RGB linear LED products, that means 170/6 = 28 meters for each port.
• In this case, you can control approximately 224 meters of DMX RGB linear LEDs with one device.

Calculation for DMX RGBW Product Example:

• If you provide control of 512/4=128 pixels per port for the RGB product.
• If you are using 6 pixels per meter DMX RGB linear LED products, that means 128/6 = 21 meters per port.
• In short, you can control an average of 168 meters of DMX RGBW linear LEDs with just one device.

You can use this product for facade lighting, LED animation, or indoor DMX lighting.