BAR-LUN-79 LED Strip With a width of 5mm, it offers a very thin light. The LED strip model comes standard in 5-meter rolls. There are 120 LEDs per meter. You can use the product indoors. You can apply it directly using double-sided tape, or you can place it inside a 7mm wide profile.
You can use the product in applications such as display cases, drawers, shelves, Barrisol ceilings, furniture, cabinets, and concealed light recesses. The LED strip series has models compatible with 12 Volt or 24 Volt DC LED drivers.
BAR-LUN-79 LED Strip 5MM
0.5cm LED Strip for the model BAR-LUN-79 LED Profile You can use the plastic casing. Since the casing is 7mm wide, the rail inside will be suitable for this LED strip.
| Product | Power Supply | LED Quantity | Light Options | Measure |
| BAR-LUN-79 LED Strip 5MM | 12 V DC or 24 V DC Constant Voltage | 120 pieces/meter 2835 Chips | 3000K, 4000K, 6500K | 0.5cm |
How to Choose an LED Transformer?
- If the product operates on 12V DC and consumes 9.6W/m of power, you can consider a 1 amp power supply per meter. Because 9.6W / 12V = 800mA, you should choose one value higher than this. To avoid voltage drop in series connections, you should not exceed a maximum of 4 meters.
- If the product operates on 24V DC and consumes 9.6W/m of power, you can consider a 1 amp power supply for every two meters. Because 9.6W / 24V = 400mA, meaning it draws 800mA over two meters. The next amp up is 1 amp. Similarly, to avoid voltage drop in series connections, you should not exceed a maximum of 4 meters.
For example, let's say we bought a 12V DC LED strip. If this LED has a power of 9.6W/m, then for 4 meters, the total power consumption is 38.4W. Calculating 38.4 / 12 equals 3.2 Amps. This means you will need a 4 Amp power supply.
