Linear LED lighting and DMX in the simplest terms for projects cased bar LED We use it. Exterior facade lighting We do design work in solid colour or RGB. These models are just like DOT LED as in our products DMX projects for exterior lighting projects. Because in exterior facade lighting projects, sometimes point lighting is appropriate and sometimes linear lighting is advantageous.

We make this choice completely according to your needs and expectations. In addition, the architectural features of the place where we will make DMX lighting are also very effective. For example, in a multi-column building RGB linear LED we use If there is a flat wide surface, we use DOT LED. We also design DOT LED in rope or rope structures such as bridge lighting.

What is Linear LED Lighting and DMX? How Does It Work?

Our RGB linear LED models DMX512 also mentioned in our article RGB bar LED products. These are programmable LED elements. For example, consider our bar LED model with 6 pixels per 1 metre. There are 3 pixels on 1 RGB linear LED of 50cm.

The number of LEDs in each pixel determines the light intensity. All LEDs in each pixel light up and go out at the same time. Because one pixel receives an RGB signal. Therefore, they all work in the same way. Here, as the number of LEDs increases, the Lm value and the Lx level in the environment increase. As a result, we get more light intensity.

Below is a representative drawing of our 1 RGB linear LED model with a length of 50 cm. This model contains 18 LEDs. Each 16,6cm long section is referred to as 1 pixel. There are 6 LEDs in each pixel section.

If the project is not suitable for RGB DOT LED, we use RGB linear LED. Because the operations performed in terms of DMX512 light automation are technically identical. This system can also be designed as a musical moving light.

RGB DMX Linear LED Series

Linear means linear in Turkish. There are different models in the series for special needs. RGB data line that we designed DMX stick LED models on linear profiles. In some models, DC power supplies can be hidden in the body. There is also an area behind it to hide the cables. If you are going to use the products on the exterior, we coat them with polymer (silicone). Thus, we protect against water, moisture and dust. Finally, we close it with a diffuser cover that transmits light.

LN22DMX36RGB Model

You can choose our LN22DMX36RGB case model for both indoor and outdoor environments. We use DMX36-RGB series bar LED in this linear product. The model works with 24 V DC electricity. It contains 6 pixels per metre.

LN34DMX36RGB Model

Suitable for indoor and outdoor architectural facade lighting. Design feet facilitate assembly workmanship. There is also a cable hiding place. The product has 6 px/mt DMX bar LED. You can get colourful lights with RGB feature. With DMX512 protocol, you can get moving musical light parties.

LN35DMX36RGB Model

24 Volt DC powered DMX outdoor lighting fixture is also RGB featured. The model we equipped with DMX36-RGB-6px / mt bar LED model can move according to the music with software. You can choose it without hesitation for extraordinary exterior lighting.

LN54DMX36RGB Model

The model has a wide light area. This case model is very suitable for indoor and outdoor lighting. The product has DMX36-RGB PCB. It works with 24V direct current in moving DMX512 projects. There are 6 pixels per 1 metre.

LN54UDMX36RGB Model

The diffuser of the product is U-shaped. So the LN54 LED case also emits light from the side surfaces. We use DMX RGB bar LED in the model. You can use it in indoor and outdoor environments. 24 VDC model is your solution in different lighting designs.

LN57DMX36RGB Model

Decorative lighting product LN57 case has DMX36 PCB with RGB feature. The model is 24 Volt. This series is ideal for both indoor and outdoor environments. You can do it with model animations that receive RGB signals with DMX512. Thus, places such as disco, hotel, wedding hall become more interesting.

LN58DMX36RGB Model

The LN58DMX36RGB case we produce for RGB light colours has a DMX PCB. You can hide the power supply thanks to the slot on the back. Thus, you can supply the product with 220 V AC voltage.

LN58UDMX36RGB Model

This product also has a power supply slot. You can bring 220 V AC electricity to the place where you install. The diffuser cover is U-shaped. Therefore, it also gives light from the side surfaces. Suitable for decorative lighting.

LN510DMX36RGB Model

The LN510 chassis with aluminium extrusion body is DMX enabled. We used steel screws in the model. There is a transformer hiding slot behind the case. The product works with 24 V DC electricity. But thanks to the slot, you can bring 220 V AC as close as possible. The model has SMD LEDs with high efficiency.

LN510UDMX36RGB Model

You can also get light from the side covers. Because the diffuser cover has a U shape. It is very aesthetic for modern lighting. You can make DMX RGB in both indoor and outdoor environments. There is a power supply hiding place at the back. This provides ease of installation and visual beauty.

LN76DMX36RGB Model

It is a very stylish model for indoor environments. It has a slot where you can hide the LED transformer. We can make it suitable for outdoor by making polymer coating for your special DMX lighting projects. The product has DMX36-RGB bar LED. The lightweight aluminium body also does the cooling process.

LN654GDMX36RGB Model

Flush mounted DMX linear LED model provides integrity on the ceiling thanks to its aluminium covers. You can use the product, silicone (polymer) coated DMX36-RGB PCB in open areas. You can make RGB light show on your plasterboard ceilings.

Where is the DMX Project Built? What are the Features?

• We make RGB coloured linear LED lighting almost everywhere. For example: building facade, bridge, stage, walkway, park, fitness, gym, dance course, entertainment centre, disco, light bar, hotel, wedding hall, tower... etc.
• It doesn't matter whether it's outdoors or indoors. We determine the product accordingly.
• DMX system consists of RGB linear LED products, panel, energy cables, cabinet, artnet controller, data cable, computer and DMX software.
• We can make it in the form of flag, moving light, scrolling light, animation, ambience, text or visual.
• If you want, the light can also move in response to music. This option provides great advantages to entertainment venues.
• On holidays or special occasions, you can change the visual animation from the computer.

What is Required for a Fixed Solid Colour or RGB DMX Project?

You need to send us the visual of the place where we will make DMX lighting. You can send photos, videos, measurements of the surface, project or drawing. Files can also be DWG or PDF. Then our team works on the visuals. In this way, we make lighting design and pricing.

You too. facade lighting If you want to have it done, you can contact us immediately.