Menu Close

How to Splice a Bar LED to Each Other?

In this article how to splice the bar LED to each otherYou will find answers to the question. Bar LED models have anode (+) and cathode (-) poles at both ends. Products consisting of LEDs and other electronic components arranged on aluminium PCB are energised from these poles. Some of the products operating with DC current work with 12 Volt DC while some models work with 24 Volt DC.

The power supply converts AC current to DC current required for the operation of bar LED products. Power supplies, purchased to meet at least the total LED power, are connected to the LED lighting tool through the DC output. Constant voltage AC/DC power supplies Although it is one of the most widely used models on the market, some bar LED products constant current power supply designed to work with.

How to Join Rod LED to Each Other? What are the Joining Methods?

The products are connected to each other in series at the (+) and (-) connection points. Three types of joining methods are commonly used in the market: solder/cable, socket/cable or socket/connector.

bar led merging

 

1- Solder and Cable Method: It is the most commonly used classical method. Short wires are soldered to the (+) and (-) poles on the PCB. The wires are soldered to the other poles in the opposite direction, plus to plus and minus to minus. Thus, the bar LED is attached to each other. Material cost is known as the lowest option. In this process, cable cutting and stripping and soldering labour is high.

2- Socket and Cable Method: Terminal blocks (sockets) are added to the (+) and (-) pole locations on the printed circuit board of the bar LED during production. Short cables are used between the added terminals. The cable pushed into the socket does not come back and remains fixed. In this way LED bar splicing is done. The assembly team gains speed thanks to less labour compared to soldering.

3- Socket and Connector Method: It is the most professional and advanced joining method. During the production phase, terminals (sockets) are placed on the PCB at (+) and (-) poles. In the assembly phase, a board-to-board connection apparatus, i.e. connector, is inserted between these terminals. Although the material cost is higher than other methods, labour is much easier and faster. It is often preferred by customers who want to install bar LEDs in long quantities.

You can see some application examples below.

bar led cable soldering

socket bar led

For power supply calculation How to Connect a Bar LED? You can review our article named.

cubukled.com to get a price

en_GBEnglish